General Plastic Extrusion, Inc.
Home  |   About Us  |   Careers  |   Capabilities  |   Bag Types  |  Calculators  |  Quality  |  Links  |   Certifications  |   Contact Us  |   Site Map   
 
Search:
 
CUSTOM CAPABILITIES
 
Custom Bag Quotes
Capabilities
Narrow Bags & Tubing
Shrink Bundling Film
Vapor Corrosion Inhibitor (VCI)
 
CO-EXTRUSION
 
APPLICATIONS
 
newsroom
Bag Types
gusseted bags A Gusseted Lay Flat Bag is a plastic bag with a triangle shaped pleat on both sides of the bag. These gussets allow the bag to expand out, giving more room for bulky, big or square items. The gusset is considered to be the depth of the bag. For example a 6" x 3" x 7" bag would be 6 inches wide by 3 inches deep by 7 inches long.
perferated roll bags Bags on a Roll (BOR) Also described as Perfed on Roll Bags (POR) are bags that are wound on 3" diameter core. They come in 2 varieties: Open-End first or Sealed-End first. By default we produce bags Open-End first. perfed roll bags
side seal bags Side Seal Bags are bags that have the seals on the side instead of the bottom. They are measured width x length (both in inches).
envelope bags Envelope Bags are side seal bags that the width is larger than the length. They are measured width x length (both in inches) These are used mostly for large items like furniture or caskets.
wicketed staple pack bags Wicketed/Staple Pack Bags are bags that are held together by either a wiire wicket or a cardboard header Staple Pack. This type of bag is measured the same as a layflat bag but there is also a lip measurement. Staple pack bags have a perforated lip. These are used in high volume, semi-automated packaging applications, small parts packaging and food service.
reclosable bags Reclosable Bags (Zipper Bags) Bags are closed at the top by squeezing the interlocking zipper together. Many brandnames such as ZipLock, Reloc, or Minigrip describe this type of bag. Applications include small parts, medical, or food service.
preopened roll bags Preopened bags on a Roll Designed to run on automated and semi-automated bagging equipment, these bags are used mostly for small parts.
tubing Tubing is measured width (in inches) by length (in feet). Tubing can also be perforated at specific intervals, without seals. This perforated tubing is refered to as sleeves.
gusseted tubing Gusseted tubing is tubing with pleats on each side allowing the tubing to expand beyond its layflat width. The gusset is considered to be the depth of the tube. For example a 8" x 4" x 500' tube would be 8 inches wide by 4 inches deep by 500 feet long.
single wound sheeting Single Wound Sheeting (SWS) is sheeting wound up as a single layer. These must be ordered in even numbers (12 rolls, 22 Rolls, 100 Rolls...) Sheeting is measured width (in inches) x length (in feet) .This can also be ordered as POR sheets (measured width in inches by length in inches)
double wound sheeting Double Wound Sheeting (DWS) is sheeting wound up 2 layers thick on a roll. Sheeting is measured width x length. The width is in Inches and the length is in feet.
center fold sheeting C-Fold Sheeting is sheeting that is folded in half and wound up on a roll. It is measured width (in inches) x length (in feet). For example 12" x 100' C-Fold Sheeting will open up to a sheet that is 24" x 100' Sheeting This can also be ordered as POR C-Fold Sheets (measured width in inches by length in inches).
center slit sheeting Center Slit Sheeting is gusseted tubing with a slit down the center of one layer of film. It is measured the same as the gusseted tubing. The slit down the middle allows the sheeting to open up to a flat sheet. For example a 25" x 15" x 100' Center Slit sheeting will open up to be a sheet that is 80" wide by 100' long.
1238 Kasson Drive • Prescott, WI 54021 • Tel: (715) 262-3806 • Fax: (715) 262-3836 • Toll Free: 1-800-532-3888 • Email: sales@generalplastic.com
GPE Facebook Page GPE Blog Posts GPE Linkedin Page GPE YouTube Channel General Plastic Extrusions, Inc.